Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Heads and Intake combo
View Single Post
  #1 (permalink)  
Old 07-23-2005, 07:05 PM
black66's Avatar
black66 black66 is offline
Join Date: Apr 2003
Location: West Coast
Age: 45
Posts: 452
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Heads and Intake combo

I have posted about which heads I should get. But I would like some feeback on what heads and intake work best toghether. Here is my setup:

355 SBC
3200 Stall
245 duration .600 Comp roller cam
Camel Hump Heads 2.02/1.60
Torker II Intake
Might Demon 750
Headman Long tube headers
MSD Ignition

My cars runs great. I am switching to a 700R non lockup and 4.56 rear gears. So it is time to get the best heads and intake...

I knew building my motor that my heads do not flow past .500 lift. And I hear that my intake may not be the best..... But the motor was built for free. So at the time I was not complaing....

Are aluminum heads worth the cost over Iron?

How do I determine what cc runners I need for my new heads?

What would be the best cam and intake setup for my cam??

Thanks guys. Looking to purchase the heads and intake asap....

Reply With Quote