Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - hei dist wiring help
View Single Post
  #1 (permalink)  
Old 05-25-2008, 02:24 PM
GT350 GT350 is offline
Registered User
 
Join Date: Mar 2006
Location: scotland u.k
Posts: 24
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
hei dist wiring help

Calling all "Vette" owners!
I wonder if any of you folks can help? I'm currently in the process of fitting a 350c.u. SBC from an 81 Corvette C3 L82 (the last of the carburettor model) to my '50' Chevy pick-up.
The problem is I never saw the car it was removed from. It has an HEI dizzy with electronic ignition. It is not the computer controlled unit.
The cap has 2 connections.... 1 for the tach and 1 for the 12v feed.
On the body of the dizzy itself are 3 wires going to a block connector.Do I need a control unit? My Haynes manual is a bit vague as to what they are. Can any of you "guys" shed any light on this! I am going nuts trying to get this running!
Any advice would be welcome!
Thanks in advance
Reply With Quote