[racecartom]

Im woundering if anyone has had a problem with there 2 inch dropped spindles from heidts they have raised 1 an 1 half upper ball joint is it safe for a race car thanks Tom

[35terraplane]

Originally Posted by racecartom

Im woundering if anyone has had a problem with there 2 inch dropped spindles from heidts they have raised 1 an 1 half upper ball joint is it safe for a race car thanks Tom

I have dropped spindles on my 33 and have used them on other cars, but none were Heights nor were the cars raced. Never had trouble.

What kind of racing?

Bob

[racecartom]

I been tring to find alittle more in the raised upper ball joint .

[35terraplane]

Originally Posted by racecartom

I been tring to find alittle more in the raised upper ball joint .

You didn't say what kind of racing, I don't want to assume, but if it is drag racing they should be ok, unless you pull wheelies a lot, then I don't know if they would hold up. That would be some thing I would not say yes too.

Bob

[racecartom]

Yes it is drag racing and I do have wheelie bars on it it is like a promod what do u think

[35terraplane]

Originally Posted by racecartom

Yes it is drag racing and I do have wheelie bars on it it is like a promod what do u think

I really don't want to be the one saying yep they will work, because I don't know if they would hold up. Doing mild wheelies, a couple inches might be ok. I would want to find out from someone that has done it, or call the company.

Bob

[cdminter59]

You didn't say what kind of car or truck you are talking about. But on a 67-69 Camaro the 1' taller ball joint was used to correct the steering geometry. If you are worried do a search on replacement bushings and ball joints for racing from afcoracing.com.

[racecartom]

on the dropped spindles i did call hights it is there 2 inch dropped spindles and they said they will be fine but that it is on a full out race car that is a 67 camaro right now I do not have any pic because it in chaises shop more pic later I realy do not need no problem with theses dropped spindles at 200 plus mile hour. ps been buey sorry have not posted sooner