[sqzbox]

Page 2 dangit!

[eloc431962]

Originally Posted by sqzbox

???? oops. no pic.

I got in a hurry Sqz. got it now though.


Cole

[sqzbox]

50 bucks?

[eloc431962]

Originally Posted by sqzbox

50 bucks?

Shoot i got mine for free.


Cole

[JeffB]

Originally Posted by hddave1

im still looking and im still not sure about this intake..the guy wants 75 bucks for it so i just want to make sure this intake will be a good performance upgrade to what i have..im also thinking about a combo of a alum intake/cam,lifter kit that will go with my 1406 edelbrock carb that will give good hp gains...the engine i got is stock 40 over 302 with about 8500 miles that i bought to put in my 85 ranger..still thinking about the best bang for the buck without tearing the engine down and starting over..just want a nice running 302 that has some getup and go..not interested in drag racing just a good runner

That intake and the Edelbrock Performer are not worth spending your bucks on as far as gaining any performance.The Edelbrock Performer RPM and the early Edelbrock F4B which is a clone of the early Shelby Cobra intakes will do the job best for you.I am sending you a pm.

[sqzbox]

Originally Posted by eloc431962

Shoot i got mine for free.


Cole

OK, S&H ? Poor hddave1 he's drooling all over his shirt. That intake looks good. Maybe JeffB's going to fix him up. At 160+ bucks for the RPM, there goes the budget.

[hddave1]

Originally Posted by sqzbox

I think any 4 bbl intake would be a performance upgrade but I wouldn't be happy with an EGR manifold. You could just block off the port and go from there. I looked at Edelbrock and at twice the price (160.00 bucks) the 85 is starting to look better! What are you planning on putting the engine in?

the engine is in a 85 ford ranger bolted to a c4 tranny with 3.08 gears.. right now its stock rebuild 40 over with 2bbl intake and motorcraft carb.. it has headman shorty headers with 2 flowmasters duel exhaust

[mud bros]

bolt in a explorer rear axle 98-2003 they come with disk brakes and 342-410 ratios.

a 373 lsd rear would really add some pepper

they are available at the local wreckers for under 250!

[hddave1]

Originally Posted by mud bros

bolt in a explorer rear axle 98-2003 they come with disk brakes and 342-410 ratios.

a 373 lsd rear would really add some pepper

they are available at the local wreckers for under 250!

thought about another rear end with disk but my truck didnt come with power brakes so i didnt think i could use disk..as far as another ranger rearend with 3.45 gears, that might be in the future but now im gonna upgrade to a better intake and maybe a cam/lifter kit..