Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - help with chevy roller cams, blocks....
View Single Post
  #1 (permalink)  
Old 04-20-2011, 06:39 PM
gofastz gofastz is offline
Registered User
 
Last photo:
Join Date: Apr 2010
Location: Sand Rock
Posts: 392
Wiki Edits: 0

Thanks: 0
Thanked 1 Time in 1 Post
help with chevy roller cams, blocks....

my buddy is building a TPI 350, now he is stumped, the fac roller block is cracked in 4 places, and couldnt find another roller block so he has a TBI truck block, still tryn to go roller, ok we have found out the roller block lifter bores are .80 thousands lower than the flat tappet block, and nobody has the machines near by to do the machine work, it would be alrite if he was useing retro fit lifters but the kit for the TPI dont come with retro fit (from compcams) one of his friends seem to think grinding down the lifter guide plates would work? not me that dont sound convinseing, we did end up finding a guy to do the machine work in .Ga..... any ideas on this would be cool thanx..........
Reply With Quote