Help with HP
So my heads should be here late next week, and i know et is all that matters, but would really appreciate some input, guesses on HP just so I can get an idea what to expect.?
So here's what it is.
0 decked, 4vr flat tops. 6cc dish
64 CC Profiler 195 heads.
484/484 lift using comp 1.6,roller rocker
1" 4 hole Carb spacer
Mid length headers to 2.5y pipe, to single mandrel 3" to the back to single bullet muffler
Yes I know long tubes are better, car is low, and roads suck here, and not going down that route again. So these will stay.
So that's what it is. Opinions? Thoughts?
Good or bad.