[dreamboat56]

Trying to identify the pictured rear aluminum brake calliper. One person thought it was a pontiac calliper, however 2 different pontiac dealership part's persons were unable to confirm it's identity.

On top of the calliper by the hydrollic flud bleed off valve is the number 322.
On the rear edge of the calliper is the number 6336.
On the under body/inside on the puck side is the number 299-5 & A-50.

Any assistance in identifying this would be greatly appreciated.

[dreamboat56]

can anyone help please

[helrazr3]

i did a google image search for rear brake caliper and it looks (close) to a bmw caliper but i might be wrong.

[chieftain]

I was thinking Pontiac Fiero or 6000 rear caliper . They had a clip that fit in the recess around the piston to hold the inner pad in place, thats how the piston looks machined anyway in your pic. Could be wrong though.

[dreamboat56]

Thanks guys for the tips, will try to track it down

[Jake_Dragon]

Doesn't look like a Fiero caliper.

[Triaged]

http://cardone.com/English/club/memb...RTNUM=18-4238#


Looks the same to me

I don't know if you are up for it...but I could tell you how I found it.

[dreamboat56]

Looks very very close, but the spring is horizontal on our caliper. Also our caliper is aluminum "ours may be a high performance derivitive of the model you found".

Thanks very much for the assistance, & if anyone else can help further identify the exact model we have, we would appreciate it.

Thanks