[sk8fate]

Okay I have a ls1 engine and its in a 2001 TA ws.6. I was wondering if anyone knew how i could run denatured alcohol.

Thanks

Rob

[BORTI]

Originally Posted by sk8fate

Okay I have a ls1 engine and its in a 2001 TA ws.6. I was wondering if anyone knew how i could run denatured alcohol.

Thanks

Rob

No the alcohol is too corrosive on rubber and plastic parts.Why would you want to try?

[sk8fate]

Originally Posted by BORTI

No the alcohol is too corrosive on rubber and plastic parts.Why would you want to try?

would that be the same as denatured alcohol?

[BORTI]

Originally Posted by sk8fate

would that be the same as denatured alcohol?

yes it is the same

[sk8fate]

thanks man!!


rob

any other tips for ampin the ls1. besides basics. ext like cam, headers, ported heads, nitro, bigger pistons, bored out... this is for my sister btw.

[GunnerTHB]

a worked top end with a computer tune will give you quite a bit of horsepower...the LS architecture allows for some pretty big numbers....a lot of the hotrodders use the truck LS motors because they are iron blocks and can be punched out and stroked further but the LS-1 is a very very capable motor. head on over to www.ls1tech.com there are some boys over there that know their stuff

[cool rockin daddy]

So what engine do you actually have? You posted earlier that you want to build a 500 hp inline six. Then you said you have a 350 laying around with domed pistons. Now you have a LS1?! Kid, you're either rich or your a big B.S.'er. Which is it?

[sk8fate]

Originally Posted by cool rockin daddy

So what engine do you actually have? You posted earlier that you want to build a 500 hp inline six. Then you said you have a 350 laying around with domed pistons. Now you have a LS1?! Kid, you're either rich or your a big B.S.'er. Which is it?

well the 350 my dad gave me...and the inline came with my camaro. and the ls1 is in my sisters trans-am..



so yea..

later

rob