Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - help rod/cam clearence
View Single Post
  #1 (permalink)  
Old 08-21-2008, 11:22 PM
SBCfan04 SBCfan04 is offline
Registered User
 
Join Date: Jan 2008
Location: omaha nebraska
Posts: 148
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
help rod/cam clearence

400sbc bored out .040" with a stock crank (3.75) and 5.7 scat rods with kb pistons and a voodoo 60101 cam. When the timing is set at TDC The lobe hits the rod on the stud head side...anything i can do?

Any help!

Thanks


Mike
Reply With Quote