Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Help with Vortec Heads...please!!
View Single Post
  #18 (permalink)  
Old 06-19-2010, 07:45 PM
cool rockin daddy's Avatar
cool rockin daddy cool rockin daddy is offline
Join Date: Aug 2003
Location: wherever cool cars are
Posts: 1,535
Wiki Edits: 0

Thanks: 0
Thanked 3 Times in 3 Posts
No, it wasn't meant as an insult. However, your tone is increasingly becoming one where an insult would be deserved. I suggested the book because you are all over the map on your questions. First you ask about 305 vortecs. Then you start talking about vortec baseplate for TPI. Then you say you are bucks down. Then you talk about reworked S/R Torquers. Now you ask about milling heads. You sound like you DON'T have a plan, DON'T understand basic engine hotrodding, and you DON'T have any money. Am I wrong on any of those assumptions? If so, I apologize. If not, get the book I mentioned, read up on it, make a plan for your engine, and make a budget to make it happen. If that sounds like an insult to you or too harsh for your sensibilities, that's on you NOT on me.
Reply With Quote