|
|
|
02-22-2003, 05:53 PM
|
||||
|
||||
Holes in throttle plates
I have an Autolite 2100 carb with a small hole drilled in each throttle plate. I know some big cammed cars need this but mine dosen't. I don't know if this was they were when new, but I want to fill the holes in to correct a slightly high idle. Can these holes be filled with JB weld or solder?
|
|
02-22-2003, 06:00 PM
|
||||||
|
||||||
|
many cars in the seventy-eighty era had drilled plates stock, this was used to meet emission rules,you could solder them closed, but that is probably not your problem, you most likely have a partially restricted or wrong idle bleed or passage.
|
|
02-22-2003, 06:03 PM
|
||||
|
||||
DANG!!! You're quick tonight.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
