Hot Rod Forum : Hotrodders Bulletin Board

Hot Rod Forum : Hotrodders Bulletin Board (http://www.hotrodders.com/forum/)
-   Engine (http://www.hotrodders.com/forum/engine/)
-   -   Holly 650 jet size (http://www.hotrodders.com/forum/holly-650-jet-size-229367.html)

birkey 02-09-2013 03:30 PM

Holly 650 jet size
 
meant to put holley 650...anyways i have a 358 sbc with an edelbrock rpm air gap, mild cam, stock heads and curious to know what jet size to use. currently has 77 primary and 85 secondary. 6000 max rpm. use smaller jets in both but doesnt run right.

F-BIRD'88 02-09-2013 07:12 PM

post the complete engine specs and carb model list number and power valve.
stock metering blocks or fubared. ( blocked power valve or....)
the normal range of jetting for a 650 holley with a power valve is 65 to 71 pri and 67 to 78 sec.
A blocked power valve will require 6 to 10 jets bigger. ( a bad idea)

lack of fuel system flow volume @ WOT. a vacuum leak.

how did you arrive at such unusual big jetting? AFR meter, drag strip testing? It feels good.

The details matter.

vinniekq2 02-09-2013 07:32 PM

650s
 
is the carb modified?if not start with 70s in the front,or less

birkey 02-09-2013 09:13 PM

I will have to get back to you with the rest of specs it's a fiends motor but his engine builder had it on a stock 350 and it ran great I guess

F-BIRD'88 02-10-2013 01:24 AM

Its not your motor. why not let your friend and his builder sort it all out.
The jetting is highly unusual for a 650.

birkey 02-10-2013 01:56 PM

Unfortunately both have very little knowledge about tuning a carb. Myself included


All times are GMT -6. The time now is 06:39 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.