|
|
|
02-09-2013, 03:30 PM
|
|||||
|
|||||
|
Holly 650 jet size
meant to put holley 650...anyways i have a 358 sbc with an edelbrock rpm air gap, mild cam, stock heads and curious to know what jet size to use. currently has 77 primary and 85 secondary. 6000 max rpm. use smaller jets in both but doesnt run right.
Last edited by birkey; 02-09-2013 at 03:35 PM. 
|
|
02-09-2013, 07:12 PM
|
||||||
|
||||||
|
post the complete engine specs and carb model list number and power valve.
stock metering blocks or fubared. ( blocked power valve or....) the normal range of jetting for a 650 holley with a power valve is 65 to 71 pri and 67 to 78 sec. A blocked power valve will require 6 to 10 jets bigger. ( a bad idea) lack of fuel system flow volume @ WOT. a vacuum leak. how did you arrive at such unusual big jetting? AFR meter, drag strip testing? It feels good. The details matter.
|
|
02-09-2013, 07:32 PM
|
|||||
|
|||||
|
650s
is the carb modified?if not start with 70s in the front,or less
|
|
02-09-2013, 09:13 PM
|
|||||
|
|||||
|
I will have to get back to you with the rest of specs it's a fiends motor but his engine builder had it on a stock 350 and it ran great I guess
|
|
02-10-2013, 01:24 AM
|
||||||
|
||||||
|
Its not your motor. why not let your friend and his builder sort it all out.
The jetting is highly unusual for a 650.
|
|
02-10-2013, 01:56 PM
|
|||||
|
|||||
|
Unfortunately both have very little knowledge about tuning a carb. Myself included
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Holly jet extenders | BadMonkey | Engine | 3 | 03-29-2009 08:14 PM |
| holly 650 dif 750 | tomthecomic | Engine | 1 | 08-06-2008 08:27 PM |
| holly 650 no full return | omega69 | Engine | 1 | 05-17-2007 11:07 AM |
| holly jet kit | fordracing | Engine | 1 | 03-26-2003 03:30 PM |
| problems with a new 650 Holly | PrimeMover | Engine | 4 | 02-09-2003 04:11 PM |
