Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - horsepower estimate
View Single Post
  #1 (permalink)  
Old 01-30-2012, 07:47 PM
teopro5 teopro5 is offline
Registered User
 
Join Date: Jan 2012
Posts: 2
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
horsepower estimate

I am building a chevy .040 bored, 3.48 stroke, 6" rods, flat top je pistons with a +5.00 rating, i am using brodix spch2005 dirt heads...they are 67cc, have a 215cc intake runner, 2.08 intake, 1.60 exhaust, i am using a cam of 546 lift both int and exh, int duration of 248 @050, exh of 252 @050, a brodix hv1011 intake and a 650 cfm carb, any thoughts on the horsepower, and torque of this combe at up to 7600 rpm? i can run 110 octane fuel but most likely will mix it 50/50 with 94 octane the compression figures out at 10-10.5:1

Last edited by teopro5; 01-30-2012 at 07:51 PM. Reason: compression...
Reply With Quote