[M@MRACING]

I HAVE A 69 COMARO 4 BOLT MAIN 350 WITH 194 HEADS AND FACTORY 4BBL (CAST IORN INTAKE WITH A QUADRAPUKE CARB) IT WAS JUST REBUILT WITH ALL FACTORY PARTS NEW CRANCK RODS HYPERUTECTIC PISTONS AND PUSH RODS IT ALSO HAS A RV CAM NOW BECAUSE IT IS IN A 79 3/4 TON PU AND IM NOT SURE IF THE HEADS WERE GONE THROUGH OR NOT. FIRST I NEED TO WHAT KIND OF HORSEPOWER IT MIGHT HAVE BALLPARK IDEA WILL WORK. NEXT I NEED TO KNOW IF I CAN MAKE IT PUSH 350 TO 400 HORSE TOPS WITH OUT PULLING THE MOTOR BECAUSE IT IS MY ONLY MODE OF TRANS RIGHT NOW OH YA IT HAS THE STOCK EXHAUST MANIFOLDS AND 2 1/4 INCH PIPES. IF ANYONE CAN HELP ME IT WILL TRULLY BE APPRECIATED THAKS.

[leastbay]

im sure 350 is possible im no expert but the first thing i would do is get some headers a new intake manifold and carburetor you could also change the heads and the cam without removing thhe engine but you dont want to have to much horsepower on stock parts on the bottom end. What i plan on doing with my truck is to slowly build a second engine as i get the time and money and switch them out when its done that way my truck wont be out of action for more than a couple days.