Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - how to make a 327 push about 300 to 350 horsepower
View Single Post
  #1 (permalink)  
Old 07-18-2003, 10:21 AM
engine-rookie engine-rookie is offline
Registered User
 
Join Date: May 2003
Posts: 5
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
how to make a 327 push about 300 to 350 horsepower

I have a 68 chevy impala 2 door with a 327; turbo 400 trans that with the casting numbers made either 175 or 275 horsepower. I want to make the engine make about 350 horses. I want to leave the bottomend stock and change every thing else like the heads, cam, intake and carb. I already have an HEI on it. It has 305 heads on it now so i know the heads need to be change. I am some what on a budget but I don't want the cheapest parts. Also I want the car so I can drive it almost everyday smooth idle. Can you give heads size with valve size, cam size with smooth idle but will bump up the horses, intake and i want to use a edelbrock 600 to 750 or just give me and ideal of what you think i would need to do to get about 350 horse. I just want to beable to leave a redlight and spend the rear wheels with some smoke.will take any ideals.
Reply With Quote