Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - How to make a tranny lube pump ?
View Single Post
  #1 (permalink)  
Old 12-16-2011, 05:25 PM
Choptop26 Choptop26 is offline
Registered User
 
Last photo:
Join Date: Apr 2011
Location: Southwest Mo.
Posts: 52
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
How to make a tranny lube pump ?

I want to tow my coupe with all four wheels down with a tow bar . It is a small block chevy with a 350 TH automatic and a nine inch Ford rearend . Looking around on some of the RV boards I've seen that they install a fluid circulating pump on the transmission and tow it in neutral with no damage . That sounds good to me but the pumps they sell cost around $1K and that just ain't in the budget . I know there are some very sharp tranny guys on here that could probably tell me how to make my own system for cheap . Like what kind of pump to use and how to plumb it in . How many gallons per minute/hour it needs to flow etc. etc. Maybe where to get one . Thanks in advance guys .
Reply With Quote