|
How much should I ask
Was wondering what you guys think I should ask for a 355 sbc with Trick Flow aluminum heads with 2.02/1.60 valves, edelbrock 600 (1406) cfm carb, Flowtech headers, Comp pro magnum roller rockers, cam is a summit cam with a 216 duration at .050 and .454 lift at .050. Pistons are KB Hypereutectic dish pistons. Compression is about 9.5 to 1. engine runs well. I do not know how many miles are on it as it was installed in 2000 and I bought the car in 2004. The springs and roller rockers in the heads are new. Intake is a Holley dual plane street dominator.
Thanks for any input
Last edited by oregon chevelle; 07-20-2010 at 03:01 AM.
Reason: adding information
|
07-20-2010, 02:55 AM
