Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - How to::: Priming An Engine
View Single Post
  #8 (permalink)  
Old 11-14-2012, 07:44 PM
Richiehd's Avatar
Richiehd Richiehd is offline
JS-70
 
Last photo:
Join Date: Jun 2011
Location: Jupiter FL
Posts: 859
Wiki Edits: 0

Thanks: 176
Thanked 59 Times in 52 Posts
Quote:
Originally Posted by allansmith859 View Post
OK guys i went to the parts store and got the tool to do this. I hooked the gauge up and started. Oil pressure is at 50 but and there are 4 or 5 rockers I cant get oil to come out of. I took those push rods out and made sure they were cleaned out and I still cant get oil to come out of those rockers. The other rockers have good oil coming out. Is it ok to say that everything is good or is something wrong. Keep in mind I just pulled this engine out of my truck to change rear main seal and new gaskets so I wouldnt think anything is wrong. By the way its a sbc Need help asap, start new job tommorw
Rotate the engine a quarter turn, prime again, rotate another quarter turn, prime again. See if that helps.
Reply With Quote