Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - how will these machines perfrom?
View Single Post
  #2 (permalink)  
Old 10-02-2012, 01:50 PM
DanTwoLakes's Avatar
DanTwoLakes DanTwoLakes is offline
Hotrodders.com Moderator
 
Last wiki edit: Contact adhesive
Last journal entry: 49 Packard
Last photo:
Join Date: Apr 2006
Location: Lake Tomahawk, Wisconsin
Age: 64
Posts: 5,900
Wiki Edits: 22

Thanks: 0
Thanked 152 Times in 139 Posts
The first two Juki machines are needle feed machines for sewing apparel, and the last one is an overlock machine, which is a specialty machine which would not work at all for sewing car interiors.

The Singer 188 is also a needle feed machine for garment work, and the 20U33 is a zig zag machine.

None of these machines are what you need for car interior work. You should look for an industrial, single needle, lockstitch, compound feed, walking foot machine preferably with reverse.
__________________
__________________________________

No one lives forever, the trick is creating something that will.
__________________________________
Reply With Quote