Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - How would these 2 cams differ/act
Thread: How would these 2 cams differ/act
View Single Post
  #1 (permalink)  
Old 12-31-2012, 05:02 PM
GMC boogie's Avatar
GMC boogie GMC boogie is offline
Member
  
Last photo:
Join Date: Nov 2004
Location: Louisiana
Age: 47
Posts: 564
Wiki Edits: 0

Thanks: 1
Thanked 5 Times in 5 Posts
How would these 2 cams differ/act
Hydraulic roller 222/228 274/280 .494/.494 lift 110 LSA 110 ICL 57º overlap intake closes 67º ABDC

Hydraulic roller 228/228 280/280 .494/494 lift 110LSA 107 ICL 60º overlap intake closes 67º ABDC


Curious how these cams would act compared to each other in the same engine. Same intake closing point,3º different overlap,one installed straight up and the other 3º advanced,single pattern,dual pattern.

10.3 CR 383 SBC Vortec heads 6 inch rods.
Reply With Quote