Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Hyd Roller lifters
View Single Post
  #8 (permalink)  
Old 10-13-2006, 08:42 PM
underdog305's Avatar
underdog305 underdog305 is offline
Member
 
Join Date: Dec 2004
Location: Greer, SC
Age: 48
Posts: 154
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Ok, this may sound dumb. When I took the retainer clip out of the lifter, all that came out was the push rod retainer and the small round plate that covers the oil hole below in the top of the lifter. I assumed that a Hyd Roller lifter would act like a Hyd Flat Tappet. There would be some plunger spring effect. They have none. I searched for a cut away view of one so I can see what's going on in there, but I couldn't find anything. There was massive sludge in the second lifter I took apart, so I want to make sure I'm not going to miss anything when I clean and inspect these things. I have stock GM Hyd Roller lifters.
Reply With Quote