Hot Rod Forum banner

Identify GM front suspension

2K views 1 reply 2 participants last post by  poncho62 
#1 ·
Have an old street rod with the front end out of a 70 A frame car think. I need to rebuild the suspension. I need to know if anyone can tell me what car this came out of. Measured the A frame bushing: Top was 1.5 inch the lower one has a large one at 1.9 inch and a small one at 1.66 inch if that helps.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top