Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Idle Fuel Restriction -too big??
View Single Post
  #10 (permalink)  
Old 05-23-2012, 01:36 PM
tubbedz's Avatar
tubbedz tubbedz is offline
Registered User
 
Last photo:
Join Date: Jun 2007
Location: United States
Posts: 120
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by F-BIRD'88
What are the primary and sec idle and hi speed air bleed sizes in that carb?
what is the main jets? What is the size of the PVCR?
FBird'88

The idle air bleed is .070 on both the primary and secondary. I did not measure the high speed air bleed. The jets are "out of the box" 76-primary, 87-secondary. I did not measure the PVCR but the pv it came with was 10.5 and we changed it to 3.5. The secondary metering blocks come with pv plugs. It also has 30cc primary and secondary pumps and the squirters are 31 primary and secondary.

The car accelerates like crazy, it is "hell a fun", but at idle it's a little rich. The idle screws are all about a half turn out. We don't mind it being rich at idle we were just curious if we could fine tune the vehicle more.....always tinkering
Reply With Quote