Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - IFS installed on 57 F100
View Single Post
  #1 (permalink)  
Old 02-12-2004, 10:17 PM
Darkman270's Avatar
Darkman270 Darkman270 is offline
Member
 
Last photo:
Join Date: Oct 2003
Location: Pensacola Florida
Age: 57
Posts: 38
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
IFS installed on 57 F100

I am truely a brave man to post these pictures. I know that I will be told what I did wrong. Really I appreciate the criticism so don't hold back. First I'll say that I added a triangular box to the top of the Fatman crossmember. It is welded to the inner boxing plate that we installed. It is 1/4" wall. I felt like it would reduce the frame flexing strengthening the overall design. I am not happy with the strut alignment with reference to the lower control arm pivot bolt but I worked with what I had. This will not be a racer or daily driver and will see infrequent trips out on mostly good roads. We also added a gusset to the strut rod mounting bracket. I am open to suggestions on how to improve this. Here are a few pics .

OK I guess I can only do one at a time.

Attached Thumbnails
Click image for larger version

Name:	2004 - 02 04 fatman ifs install bottom drivers side w arm and strut 2.jpg
Views:	243
Size:	40.8 KB
ID:	1239  

Last edited by Darkman270; 02-12-2004 at 10:29 PM.
Reply With Quote