Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - ingersoll rand compressor pump "HELP["
View Single Post
  #2 (permalink)  
Old 11-25-2012, 10:14 PM
timothale timothale is offline
Registered User
Last wiki edit: General Motors transmissions Last photo:
Join Date: Mar 2006
Location: near Yellowstone park
Posts: 5,122
Wiki Edits: 27

Thanks: 35
Thanked 487 Times in 430 Posts
local shop ?

about 12 years ago I rebuilt my pump. I ask a few local garages and found a shop that did aircompressors. I took the pump in and they identified it and sold me the parts. It gets pretty cold around here, 6 months of good snow ski weather , then 6 months of poor snow ski weather. so I wrapped some heat tape that is normally used to keep water pipes from freezing around the pump and I plug it in in the winter for 3 or 4 hours whenI want to use the shop compressor. I also made some dippers for the rods, drilled the caps and X ed the cap bearing surface, Like I did to My old Flathead 4 T motor.
Reply With Quote