Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - Installed Bendpak XPR-10C-168
View Single Post
  #7 (permalink)  
Old 06-09-2011, 09:15 PM
Overdriv's Avatar
Overdriv Overdriv is offline
Member
 
Last photo:
Join Date: May 2005
Location: IL
Age: 64
Posts: 740
Wiki Edits: 0

Thanks: 0
Thanked 2 Times in 2 Posts
Well two of us did this one with a tractor and end-loader and two ladders. It wasn't bad, but I doubt if I ever have to install another. The top rail was indeed the hardest part. Stringing the cables and hose wasn't bad at all.

There is no way you could put this one all together on the floor then just stand it up. It would have hit my lights. We had to maneuver it around in between the lights at an angle before standing each post up straight.

I'm sure you know what you're doing, but this was our first and we did it the way we thought we had to and striving to be safe.
Reply With Quote