Hot Rod Forum banner

Installing Comp Cam Roller Rockers on 5.0L Ford Motorsports GT-40

5K views 2 replies 3 participants last post by  Dubz 
#1 ·
I just purchased a set of Comp Cam 1.7:1 roller rockers, PN 1054-16, for my
1998 5.0L Ford Motorsports GT-40 aluminum head crate engine. I read about these in the July issue of Car Craft; Tech Article: "400 hp with a stock cam."

I just opened the package and there are
no instructions included; not even a one page overview. It's been a long time since I've done any internal engine work. This engine is in my 34 Ford 3-window coupe Street Rod which I built over 3 1/2 years, did everything myself.

Where can I find recommended installation instructions, to include:
1. Torque specs for installing on aluminum heads
2. Valve lash or lifter preload adjustment
3. Recommended prelube and where; ie. pushrod cup, pedestal roller, valve roller?
4. I have ARP Assembly Lube, is this adequate?
5. Anything else I need to do or be aware of

There are only 3000 miles on my crate engine.

Thanks,

Mike
 
See less See more
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top