Hot Rod Forum : Hotrodders Bulletin Board - View Single Post - installing motor with aluminum heads
View Single Post
  #4 (permalink)  
Old 06-05-2003, 03:30 PM
mac302 mac302 is offline
Registered User
 
Join Date: Jun 2003
Location: kentucky
Posts: 8
Wiki Edits: 0

Thanks: 0
Thanked 0 Times in 0 Posts
Post

I would say either the leveler or the carb plate would be a good idea. But I would not pull the trans with it. Especially if the intake bolts do not thread deep into the alum. head. Hate to see anything bad happen like it did to me. Stripped the threads right out. Liked to laid down and cried when that 400 b-block fell 4 feet. <img src="graemlins/pain.gif" border="0" alt="[pain]" />
Reply With Quote