|
|
|
06-04-2005, 03:35 PM
|
|||||
|
|||||
|
Intake Manifold Choice? Please Help
Hello,
I am trying to figure out what intake manifold I want to buy. I got everying put together except my intake, this is what I have. sbc 400 bored .030 5.7 rods scat 7/16 cap screws trw forged pistons .150 domed 235/245 duation @.050 .488/.510 lift 882 heads fully ported with 2.02/1.6 valves 1.6 full roller rockers compression will be around 11:1 2004r tranny stalls around 2000 4.56 posi and gears 26 inch tire 1969 Chevrolet Kingswood Estate Wagon weight probably 4500 or more What manifold would you guys choose it is a strip/street but I don't mind if it is alittle bad on the street Thanks TRent 
|
|
06-04-2005, 04:04 PM
|
||||||
|
||||||
|
combo looks pretty good, sorry im of no help with the intake choise, but i hope your 200r4 is a built unit, those things are weak as hell stock, other wise, looks like it'll be fun to drive.
|
|
06-04-2005, 04:12 PM
|
||||||
|
||||||
|
Holley Strip Dominator and you need a 2800-3200rpm converter. Your pistons will thank you by not melting.
Larry
|
|
06-04-2005, 05:58 PM
|
||||||
|
||||||
|
Edelbrock RPM Air gap. I agree on the converter coldknock. 2800-3200 rpm.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Building A 302 Chevy | Scorpio Shaping Flow | Hotrodding Basics | 6 | 01-16-2007 05:55 AM |
| Intake Manifold | rbfpezcore | Engine | 2 | 07-23-2004 04:14 PM |
| Chevy 350 Intake Manifold Gasket | morenbd | Engine | 4 | 07-11-2004 05:05 PM |
| Intake manifold | Frosty | Engine | 1 | 11-21-2003 10:51 PM |
| Intake Manifold Bolts - Need Sleeves?? | jerseyjeff | Engine | 5 | 11-18-2003 01:00 PM |
