It's been awhile
Hey all, it has been awhile since I've posted on here. Just can't get the time as much as I used to. Between work, going back to school, and the house hold chores my time has been limited. I am on my way to getting the 4x4 Caddy going. I ended up getting the whole Caddy w/ motor from Hemmigremmie. Got a 12 bolt rearend w/ 3.73 gears, set of 4" leaf springs to do the lift. I may go ahead and add a set of 3" blocks to the rear and do a spring over conversion on the front axle to go for a 7" lift on the old Caddy. I may also to a little body lift to it to help reduce the amount of altering of the floorboard to fit the tranny under the body. By the time it's said and done, that Caddy is going go be a few stories higher.
I still need to figure out which tranny and transfer case I'm going to use to connect to the 500ci motor. I hoping to get the Caddy up on its new legs by the end this summer.