Started the cleaning, sanding, wire brushing and painting looks real clean and simple
I made the boards from wood to fit where the tank void was and the main foot board, using wood different from sheet metal good sound proofing and not as much heat transfer I hope!.
The steering came together just had to make a extension shaft and angle the rack back a little, made brackets and mounted the column off the firewall plus its bolted through the dash assembly to keep it rigid.
The twin tank are more to satisfy my autism and give some balance to a very light back end.
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)