Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
hotrodders.com: Project Journals: mr_firewall's Journal
User Name
Password
lost password?   |   register now

View mr_firewall's profile Entries: 52
Views: 10159
view from the beginning || now viewing most recent entries


Pages (11): 1 2 3 4 5 [6] 7 8 9 10 11

04-01-2012 11:54 PM more photos
more photos


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #27]

04-01-2012 11:51 PM more updated photos
ok well i finnished the spinals today the hubs from the benz has a larger seal and the actul rear barring center was just a little larger then the orignal spinal.so i had to make it just a dab larger so the seal and bearing fitted snug.then i made 2 brackets to hold the benz calipers.i also finished the steering box brackets, and then played around cutting down the dash pannel.its getting there


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #26]

04-01-2012 11:47 PM heres a update
here are a few new photos all i got done was made a few exaust pipes


(click photo to enlarge)

(click photo to enlarge)
  [Entry #25]

04-01-2012 11:45 PM more photos
ok all ive been working on the steering on the truck,took me a while but i think i got it figured out,looked easy but wasant as easy as it looked lol


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #24]

04-01-2012 11:41 PM here are more photos
ok guys here are a few new photos of my progress i installed the clutch and break peddels and the master cyl and break booster.I also had 2 work on the engine some i got to looking at y the fuelpump wasant working and found that the oulpump shaft wasnt turning.pulled the oil pump and shaft was twisted so i had 2 repair it. i actully couldnt get like it was orignal by trying to rebend so i actully took the welder to it and built it back up and ground it to match the orignal way it was.as the tip of it was made like a flat screwdriver so was easy to fix.but the fuel pump was bad also so didnt help much there.so i will need to get a regular 5 to 7lb electric fuel pump. sorry but didnt get any photos of the repair i made to the oilpump shaft.



(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #23]

Pages (11): 1 2 3 4 5 [6] 7 8 9 10 11


All times are GMT -6. The time now is 09:13 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.