The running boards turned out to be no better than the ones I already have. I have a friend that has a set of smooth fiberglass boards that I can get cheap, so I guess I will get those for now. Hope to get back on the body this weekend I have been side tracked with other things lately.
I went to the auto fair this past weekend and got a few parts. I got a great deal on a large roll of carpet for $20. I also got a nice rear view mirror for $20. I am going this Sat. to look at a set of running boards, mine are pretty rough.
I got the body temporarily set back on the frame so I can make sure the rear shock crossmember will not hit the body. I also need to get the DD steering shaft and one more U joint to finish mocking up the steering system. I ordered the inner front right side cowl repair panel and the right lower quarter panel yesterday so I will have all the sheet metal pieces for the right side when they arrive. I got the steering column mocked up and put in two AC vents in the dash. I also mounted the headlight and wiper switch's. Not in the picture I welded up some of the holes in the lower middle dash area and mounted my ignition switch there.
)
)
)
)
)
)
)