I bought a T Touring body with a title back in November 2012. Since that time, I've collected parts and started the build.
Here's the rundown,
27 T Touring body, cut down, may stretch the cab or doors.
Model A Frame, need to figure out how much kick-up, K member and box it.
Ford 300 I6 with Offy intake & Holley 600, need to fab lakes headers, may be out of a F600 and have a forged crank, need to open her up & see.
Model A gas tank, flipped around & sitting out back.
Frankland Quickchange center housing, need the guts & a banjo rear to try to run it with.
Split bones for the front suspension, still need to lengthen the dropped 32 crossmember I've got to fit the frame, have reverse eye spring & 3 stock 28-35 axles to choose from. We'll see how low I get.
Lots of raw sheetmetal and stamped patch panels.
What I need still is:
A transmission, looking for a 4 spd toploader.
Banjo rear end, hopefully this'll be adaptable to the QC I've got.
Rear wishbones
F1/F100 steering box
New wheels, tires & brakes
...for starters.
(click photo to enlarge)
| 
(click photo to enlarge)
| 
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
All times are GMT -6. The time now is 09:59 AM.
)
)
)
)