I built this one from a Total Performance "basic T kit" it has a GM crate 350, Comp Cam, B&M 144 blower, & Turbo 350 tranny. I started this one on Labor Day weekend, and drove it on Memorial Day in a parade.
(click photo to enlarge)
| 
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
I built this car from scratch, using CCR blueprints. I only had a sawzall, a half inch drill, and a 9" grinder, when I started. I would sawzall the 3/8" plate to rough size, then use the grinder to finish the brackets. I built the front axle from .250 wall D.O.M. tubing, using a hydraulic bender to make the drops. I borrowed a "tombstone" welder from a friend to put it all together. It took 20 months from the time I started, till I drove it on the street the first time.
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
All times are GMT -6. The time now is 08:53 AM.
)
)
)
)
)