Well, I had to take one of the inner fender back off so I could access the motor easier. Still had some lines and wires to run. Here I have installed the Spal electric fan I got with my be cool radiator kit. It pulls 2300 cfm, so hopefully it will be enough with the aluminum radiator.
(click photo to enlarge)
|
|
|
|
Here's a couple of more views.
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
I got the inner fender panels mounted in place, and they look great. It makes it a bit confusing working in the compartment with the reflection duplicating everything.
(click photo to enlarge)
| 
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
Well, I got the core support bolted up and mounted the radiator, looks like everything is going to work out well here. Still have to mount up the electric fan, hoses, tranny lines and such.
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
I installed the steering wheel temporarily when I took the nova to the exhaust shop, intending to take it back off. After thinking about it, the inside is done except for interior and I might as well leave it on. So I installed the levers, bolted it down good, and put on the horn button. Looks good.
(click photo to enlarge)
|
|
|
|
All times are GMT -6. The time now is 04:32 AM.
)
)
)
)
)
)
)
)
)