Finally the nova body is painted. Still some more to go though. I am going to color sand, then apply rally stripes to the front cowl, and continue it on down the dash, and then on the back under the rear windshield.
(click photo to enlarge)
| 
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
Heres a shot of the painted core support and the body, ready to be painted. I wet sanded the urethane primer with 600 grit, now I have to apply the epoxy sealer and color.
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
Now that the firewall is painted I can move on to the body. I also painted the core support, front subframe and some misc parts blue.
(click photo to enlarge)
|
|
|
|
Now its time to paint the fire wall, brake lines, front subframe, and I have the core support ready too. First I had to put some filler on the plugged heater hose holes. Im using a bulkhead plate for the heater and A/C hoses.
(click photo to enlarge)
| 
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
Now that the motor is out of the way and before I remove the front subframe, its time to route the new brake lines for the disc-disc brake system. I used the original line from the rear to about the mounting point of the subframe. The front lines had to all be built from scratch.
(click photo to enlarge)
| 
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
All times are GMT -6. The time now is 05:07 PM.
)
)
)
)
)
)
)
)
)
)
)
)