Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
hotrodders.com: Project Journals: Ianmerry's Journal
User Name
Password
lost password?   |   register now

View Ianmerry's profile Entries: 253
Views: 84036
view from the beginning || now viewing most recent entries


Pages (51): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [40] 41 42 43 44 45 46 47 48 49 50 51

04-15-2007 04:24 PM April 07
With the car on the ground, checks were made to the alignment of the body lines and general fit/opening and closing of the boot,doors and bonnet.



(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #58]

04-15-2007 04:21 PM April 07
Easter in the UK, time for a spring clean in the garage after more mold making fibreglassing.
Radiator cowl-
A 3 row aluminium rad was purchased from the U.S. to handle the job of cooling the BB Ford. To hold the rad into place and improve cooling a cowl and 14" fan were grafted into place to take all the draft through the rad. The cowl was constructed out of fibreglass after making timber molds to the desired size and shape. All smoothing will be done at a later date.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #57]

03-26-2007 03:02 PM March 07
Ride height sensors mounted in place on the front and rear. These will be connected to the head unit and work together with pressure sensors at each corner, all part of the Dakota Digital kit.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #56]

03-26-2007 02:59 PM March 07
Boot floor part 2 awaiting fibreglassing.
New struts in place holding up the boot.
Bulkhead / cowel area before shaping takes place (note areas for water drainage and air intake to heater)
Shotgun scoop sits proudly in place


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #55]

03-26-2007 02:53 PM March 07
Rear calipers mounted in place on the 92 Ford rear.
The discs used are Ford Probe UK with BMW Mini aluminium floating calipers. Stock axle end plates were cut down then brackets fabricated,welded into place and milled to align. Lokar universal cable set does a fine job of attaching the lot to the hand brake.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #54]

Pages (51): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [40] 41 42 43 44 45 46 47 48 49 50 51


All times are GMT -6. The time now is 07:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.