Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
hotrodders.com: Project Journals: tuske427's Journal
User Name
Password
lost password?   |   register now

View tuske427's profile Entries: 318
Views: 66222
view from the beginning || now viewing most recent entries


Pages (64): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [43] 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

01-03-2011 08:18 PM trans tunnel build 1
I spent my available time this past week building the recessed firewall. I decided against making it removable, and I made it intentionally asymmetrical to provide more room for the clutch hoses/ linkage.

I went through 2 sets of cardboard mock ups and ultimately warped the heck out of it by welding it too quickly. I need to be more patient. Lesson learned, I hope. I made a slice to help alleviate some of the warpage, but it'll need more finessing to make it presentable.

I still need to build a cap in the front, as there is a slight overhang of the firewall sheet metal on the top passenger side. I'll box that in.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #108]

01-03-2011 08:16 PM engine mount mock up
I mocked up some tubular bars for the engine mounts and built the revised trans tunnel.

Attached are a couple of pics of the tubular mounts. Now the challenge will be to get these built out of metal.

Once these are done then the two driver side header tubes and be rebuilt, preferably to the back of the mount so the header can possibly be removed without the engine coming out.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #107]

12-24-2010 10:23 PM Framed 3-3
and more pics


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #106]

12-24-2010 10:22 PM Framed 3-2
more pics


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #105]

12-24-2010 10:21 PM Framed 3
This week I've worked on the frame crossmember altercation to make room for the LS engine. There was a little scalping, a little reinforcing, a lot of grinding and trimming, a lot more hammering and pounding and bending and tweaking and adjusting to get it to fit.

My neighbor helped me with this and welded this together for me. My 110 volt welder would not be strong enough to handle this.

After getting this back together it became apparent that the headers won't fit and will need some modification on the driver's side. It's a bummer, too, as they had that coating on them. Oh well. This will give a chance to modify them as needed to clear the engine mounts/ supports.

I also raised the trans tunnel to give more room for the trans. Even with that lift it is still a snug fit up there. I only tacked it in place in case it needs more modification.

Next steps will be to mock up the mounting systems/ brackets, etc and start building them.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #104]

Pages (64): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [43] 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64


All times are GMT -6. The time now is 08:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.