Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
hotrodders.com: Project Journals: Enigma10's Journal
User Name
Password
lost password?   |   register now

View Enigma10's profile Entries: 228
Views: 48280
view from the beginning || now viewing most recent entries


Pages (46): 1 2 3 4 5 6 7 8 9 10 [11] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

03-30-2012 10:48 PM Window supports
While Iím waiting for the fibre-glass to set on the back tray I decided to played around with the truck mirrors I found on the net.
Took a photo of the window screen support as they are back from the chrome platers, very poor chroming job wonít be going back to them it seems they never cleaned the steel first, the chrome has the steel rolling marks in it. I thought he looked like a very tired person I guess you canít find everyone that takes pride in their work.
They chromed the diff cover also they never took out the pit marks on the aluminium so this will need to be stripped & re-done, nice one Windsor Electroplaters Adelaide wasted $200.00 bucks.



(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #178]

03-29-2012 08:47 PM Back indicators continued
Loaded the incorrect photo on the last post so will try again
Photo 1 Night Rider electronic kit Assembled.
As I cannot add a video here follow the link to see the lights working http://youtu.be/iiqGKztZfKU



(click photo to enlarge)

(click photo to enlarge)
  [Entry #177]

03-29-2012 07:08 PM Back Lights
Started on the back lights, purchased the lanterns from Speedway, these always look good. Decided on something different for the indicators, all of us oldies will remember KIT Knight Riders car with the front lights in the grill well I have taken this one step further using an electronic kit supplied down here & a few modifications, high powered LEDís, installed a pot and changed a few resistors gave me what I wanted. I drilled two rows of holes to fit the 3mm LEDís into the back ridge on the tray.
18 sets of wires & LEDís position vertically has the LED's raising and falling, the pot allows me to speed them up or slow them down.
Photo 1 LED showing the anode and cathode, anode is positive, cathode is negative plus the wooden template made.
Photo 2 LED cathode bent at 90 degree.
Photo 3 both LEDís set up ready to be soldered.
Photo 4 LEDís solder together and the wires added.
Photo 5 Hole drilled in the tray ridge.
Photo 6 Night Rider electronic kit assembled.



(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #176]

02-17-2012 09:27 PM Radiator Cover Continued
Photo 1, radiator fan cover painted in finish coat.
Photo 2, Front cover with all the shiny pieces added.
Photo 3, the overflow tank added couldn't go past this I love all things chromed.
Photo 4, Moto-Meter in all its glory
Photo 5 & 6 Cover installed to the radiator far better than the fiberglass one I first had. This should solve the comment made a few months ago, your not leaving the radiator like that are you, what do you think Wayne looking better.




(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #175]

02-17-2012 09:08 PM Radiator Cover continued
Radiator cover final undercoat applied
Photo 1 & 2, fitted the cover to the radiator to mark out the center to fit the shiny pieces.
Photo 3 & 4, Shiny pieces added, as I want to have this working an Ali disc will need to be machined to transfer the heat to the Moto-Meter, it wonít be correct but close, as there should be no air flow over the top of the radiator.
Photo 5, painted the core black not sure if I like it but itís too late now.
Photo 6, Finish coat applied.



(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #174]

Pages (46): 1 2 3 4 5 6 7 8 9 10 [11] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46


All times are GMT -6. The time now is 01:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.