Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
hotrodders.com: Project Journals: Enigma10's Journal
User Name
Password
lost password?   |   register now

View Enigma10's profile Entries: 239
Views: 62643
view from the beginning || now viewing most recent entries


Pages (48): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [30] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

02-09-2010 07:49 PM Diff
Requested to put shear rings into the diff head to support the S/Steel 1/2 shaft tubes. These now have 6 x 3/8 bolts one locater pin & the shear ring. I guess it's better to be safe.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #94]

01-17-2010 08:17 PM Tank
Using two 1" by 1" S/Steel angle pieces for the mounting brackets, welded these on after I welded two ½" nuts to the inside. The tank is nearly ready to be cleaned and polished should come out looking very nice.


(click photo to enlarge)

(click photo to enlarge)
  [Entry #93]

01-17-2010 08:11 PM Tank
Welded in a plate to support the pump plate many tapped holes to ensure it won't leak.
Made the top plate welded the pump bracket to this. Spent 6 dollars on the brass tails and fitted this to the plate. Used a stainless steel screw to run the sensor wire through and glued the wire in. Still needs a breather added.



(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #92]

01-17-2010 07:56 PM Feul Tank
Manufactured a couple of baffles tig welded them in and welded the end back on again. Checked that the tank fitted in the tray. Cut a square hole in the top for the fuel pump and sensor to go. Welded a dairy castellated nut for the filling nozzle.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #91]

01-17-2010 07:49 PM Feul Tank
Well I guess I need a fuel tank to keep the engine running. Acquired an old stainless steel 16 gallon LPG gas tank for free. This tank is 4" to long and has no baffles in it, I cut one end off and then cut out 4 inches.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #90]

Pages (48): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [30] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48


All times are GMT -6. The time now is 12:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.