Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
hotrodders.com: Project Journals: Enigma10's Journal
User Name
Password
lost password?   |   register now

View Enigma10's profile Entries: 239
Views: 63170
view from the beginning || now viewing most recent entries


Pages (48): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [32] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

11-04-2009 04:58 PM Brake manufacturing
Sent drawings of the brake arm & booster brackets to profile cutters and got them laser cut. Tack welded it to the boss.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #84]

11-04-2009 02:34 PM Steering Arm
First photo shows top Support bracket welded to the firewall
Second shows the steering arm in place top support is temp the arm will be covered in S/Steel.
Third Shows Steering box connected to arm.



(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #83]

11-04-2009 02:29 PM Steering Arm
First photo shows old steering arm with the new steering arm on top. The new arm is 6" higher at the fire wall than the old giving me plenty of room for the brake peddle.
Second shows the cross brace added to support the bottom bracket.
Third is the top support bracket.



(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #82]

11-03-2009 06:29 PM Front Engine mount
Front Engine mount for a 350 Chevy Decided to put this design up as I drew it and worked out all the measurements I guess I can share it. This is for those how want to have the alternator low down close to the chassis. There is only one cut out on the left hand side as the other has the alternator mount on it. Manufactured from 8mm or 3/8 plate steel. I have this in AutoCAD if anyone would like it. Sorry its in Metric


(click photo to enlarge)
  [Entry #81]

10-16-2009 04:00 PM Steering
Didn't like the idea of having a solid tube coming from the chassis to the steering wheel so after checking with the certifier I have changed it to a system with universals at least if someone hits me the steering will collapse. Cut the VW steering box off at the bottom, acquired a Nissan Pulsar GTIR steering column which has two universals on it. Sent both to an engineering company to have a spline machined on the steering box end.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #80]

Pages (48): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [32] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48


All times are GMT -6. The time now is 02:49 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.