Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
hotrodders.com: Project Journals: Enigma10's Journal
User Name
Password
lost password?   |   register now

View Enigma10's profile Entries: 228
Views: 48302
view from the beginning || now viewing most recent entries


Pages (46): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [36] 37 38 39 40 41 42 43 44 45 46

08-28-2008 05:53 PM Starter & alternator
A couple of shiny bits picked up cheap on the internet to be added to the motor later in the build


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #53]

08-28-2008 05:23 PM Steering Box revisited
Entry #35 has gone out the window. I didn't like the look of the box section hanging down so out it goes. Purchased a high torque starter motor which is allot smaller than the standard one. This enabled me to push the steering box further forward and higher from the ground. Welded a 2" wide 3/4" thick plate to the bottom of the chassis to strengthen the mounting of the steering box. Should look good once it is chromed.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #52]

08-28-2008 04:58 PM Front Shock Mounts
Welded 1/4 inch plates to these so I can bolt them on. This was done so I could get them chromed. Also if I decide later to change the shocks un-bolting is better than a gas torch.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #51]

08-28-2008 04:35 PM Front Shocks
Front shock mounting brackets decided to use hydraulic shock mounted to the bat wings. These were profile cut from 1/4 plate with a few holes added for looks.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #50]

08-28-2008 02:49 PM 4 bar to chassis
Welded the tube to the chassis and bolted two of the four bars to them. Need to think about the lower bars and the design of the plates before continuing on.


(click photo to enlarge)

(click photo to enlarge)
  [Entry #49]

Pages (46): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [36] 37 38 39 40 41 42 43 44 45 46


All times are GMT -6. The time now is 02:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.