Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
hotrodders.com: Project Journals: Enigma10's Journal
User Name
Password
lost password?   |   register now

View Enigma10's profile Entries: 239
Views: 62965
view from the beginning || now viewing most recent entries


Pages (48): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [39] 40 41 42 43 44 45 46 47 48

08-28-2008 02:49 PM 4 bar to chassis
Welded the tube to the chassis and bolted two of the four bars to them. Need to think about the lower bars and the design of the plates before continuing on.


(click photo to enlarge)

(click photo to enlarge)
  [Entry #49]

08-28-2008 02:44 PM 4 Bar to chassis
Four bar chassis connections, drilled a pilot hole then used a 3/4 hole saw to put the through tubes into the chassis. This is required to stop the frame from squeezing together when tightening the bolts. The tubes are 5/8 inside diameter.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #48]

08-26-2008 09:52 PM Four Bars
Manufactured the four bars from 5/8 Schedule 160 seamless tube, tapped left & right hand 5/8 UNF threads into each end. Using a clevis links at one end and an eye bolt at the other.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #47]

02-23-2008 09:54 PM Brake Callipers
Cleaned all o-ring grooves out, greased the o-rings and installed. Fitted the brake pads and installed the callipers back onto the hubs.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #46]

02-23-2008 09:21 PM Front Callipers
Brake callipers are back from the electroplaters. Re-taped all the threads to ensure there were no loose materials that could go inside the callipers. Wire brushed the inside also to remove loose nickel. Cleaned and oiled all the inside parts refitted the piston seal after oiling, fitted the piston and outer dust seal.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #45]

Pages (48): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [39] 40 41 42 43 44 45 46 47 48


All times are GMT -6. The time now is 07:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.