Finally my wheels arrived, and the are fitting , oh so nice.
About a year before the arrived, but thats a whole other story.
Later i will change the hoops and paint them a nice color but for now its rolling.
Wander
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
Started working on the car again since a long time.
Could not find a set up i liked , so made my own.
120 Amp dynamo with automatic tensioner and mounting brackets.
The engine bay is kinda small in the front so the reason i put the dynamo above the engine.
Also putting the engine together next week or so.
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
This was also a bussy job, building a nice trans. tunnel.
I wanted a little org. like shape , dont ask me why , but it turned out nice I think.
The cover is set by bolts so it can be removed for adjusting and so.
The underside off the floor before the paint ruines it.
Wander.
(click photo to enlarge)
| 
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
In the mean time we made the new drive shaft, with a support bearing and a slider piece.
All 1350 U joints.
And finaly the nice work started.
Some test sitting , for seat height and so on.
Wander.
(click photo to enlarge)
| 
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
Made a new C pillar to replace the wood ones, also gona relpace all the wood framing in the back half off the car.
And just a nice pic. i think.
And one off the bridging structure i made for the new floor.
Wander.
(click photo to enlarge)
| 
(click photo to enlarge)
| 
(click photo to enlarge)
|
|
|
|
All times are GMT -6. The time now is 04:49 AM.
)
)
)
)
)
)
)
)
)
)
)
)
)