Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
hotrodders.com: Project Journals: 123pugsy's Journal
User Name
Password
lost password?   |   register now

View 123pugsy's profile Entries: 268
Views: 102749
view from the beginning || now viewing most recent entries


Pages (54): [1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

06-01-2014 07:28 PM FLOOR BEADS
I got the beads put in the floor boards and then test fit the final time.
I will take the pieces to work to spot weld them all together.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #268]

06-01-2014 07:24 PM HOLE AND GAP FILLING
I welded up all the small trim holes down the side of the body and then filled the gap below the holes with lead. I also did the two factory seams up to the roof. I will cut off the last seams when I chop the top so I left those ones.

Then came some epoxy primer.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #267]

06-01-2014 07:17 PM DUNKED
I had the body dipped. The metal underneath was in quite good shape, except for the whole bottom of the car of course. But that was already cut off, so rust issues are finally over.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #266]

06-01-2014 07:09 PM FIREWALL CON'T
I got the tunnel opening cut out and flange tipped.

I then started making up some floor braces.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #265]

04-13-2014 08:43 AM FLOOR PANELS
I used some brake formed angles to make up floor pan templates.

Got them cut and fit up for checking.
They seem to fit fine and just need some beads added.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #264]

Pages (54): [1] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54


All times are GMT -6. The time now is 03:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.