Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
hotrodders.com: Project Journals: 123pugsy's Journal
User Name
Password
lost password?   |   register now

View 123pugsy's profile Entries: 268
Views: 98550
view from the beginning || now viewing most recent entries


Pages (54): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [21] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

12-10-2010 04:48 PM DELRIN BUSHINGS
I got most of the upper bushings done.

I just have to drill and tap for the grease fittings and finish the polishing before I pop them all in.

Third pic shows half finished bushings and 1'' diameter stainless sleeves.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #168]

11-27-2010 05:32 AM Control Arm Reaming

I got my new adjustable reamer in and I started working on one of the upper arms.

I turned out a delrin bushing to keep the reamer straight thru the bores. It is in the first pic.

The second pic shows flakes of stainless being cut out.

Third pic shows the first bore almost done. The area of machinist's blue is getting smaller.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #167]

11-14-2010 04:19 PM Upper Mounts Done

I got the upper control arm mount brackets pretty much done except for some touch up polishing.

I clamped on the passenger side and it seems OK.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #166]

11-09-2010 06:41 PM Upper Control Arm Mounts con't
I got the two top plates welded and polished on both.

I then tacked the tabs on that the arm bolts to on the driver side mount.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #165]

11-08-2010 05:51 PM Upper Control Arm Mounting Plates
Still sick of reaming out control arm sleeves so I started lightening up the upper control arm mounting plates.

Grunt work also but different from what I was doing.




(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #164]

Pages (54): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [21] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54


All times are GMT -6. The time now is 06:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.