-- Hot Rod Forum

Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans Project Journals: Xero420's Journal
User Name
lost password?   |   register now

View Xero420's profile Entries: 3
Views: 845
view from the beginning || now viewing most recent entries

07-17-2008 12:28 AM Vortec heads
I found a new set of Vortec heads and an intake "Edlebrock dual plane performer". for $90. The heads are stock with 1.94 1.5 valves. I need to check in to have them worked on.

  [Entry #3]

07-17-2008 12:26 AM Making more power
Ok I got this 350 and I want more power. I have check the internet for the cheapest was to get better head and power. And to get read of these 882 set up.

I found alot of info on the Vortec system and I found that the Vortec can perform very well at a low cost.

  [Entry #2]

07-17-2008 12:22 AM My Camaro Z28
I got an 84 Camaro Z28. It came with the 305 HO, and T5 5 speed tran.

Last fall I bought a new 010 350 motor and put it in. It's nice and it runs good. But I want more power. This is the stats on the new 350.

Block; 010 350 0.060 over.
Crank; forged GM 10/10
Rods; forged TRW 5.7
Pistons; forged flat top TRW one set of eye brows
Cam; Comp. Cams R/V
Timing; Pete Jackson gear drive
Heads; GM 882 in 2.02 ex 1.6
Intake; Edlebrock performer dual plane
Carb; Holley 670 dbl pumper

This puts out around 300 hp, and around 360 fl lbs of torque.
Not bad for only $750.
Not bad fo

(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #1]

All times are GMT -6. The time now is 12:18 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999 - 2012. All Rights Reserved.