Hotrodders.com -- Hot Rod Forum



Register FAQ Search Today's Posts Unanswered Posts Auto Escrow Insurance Auto Loans
hotrodders.com: Project Journals: jgb7038's Journal
User Name
Password
lost password?   |   register now

View jgb7038's profile Entries: 367
Views: 71945
view from the beginning || now viewing most recent entries


Pages (74): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [33] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74

07-05-2010 08:06 PM Cowl extensions
When I extended the lower cowl area,I did not get a chance to box the lower part in.So I did that too since I had the truck up on jack stands.


(click photo to enlarge)

(click photo to enlarge)
  [Entry #207]

07-05-2010 08:01 PM Cab corners
After getting all the filler cleaned out I was able to finish welding up the cab corners.


(click photo to enlarge)

(click photo to enlarge)
  [Entry #206]

06-23-2010 08:29 PM Cleaning out some filler......
Was cleaning the lower cab corners so I could weld on them,and got alittle carried away.....ended up stripping the rest of the filler out of the cab.I had found some small rust bubbles where the seams from the top chop are.So I figured I better dig it all out now so I does not bite be in the butt later.I sanded on the doors for now,haven't seen any signs of rust but Im going to give them a VERY close inspection.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #205]

06-23-2010 08:24 PM Getting access
With the motor and trans out,I can get to the areas that where obstructed by the drive train.I put it back up on jack stands,so i cna get started on the underside of the cab corners.


(click photo to enlarge)

(click photo to enlarge)
  [Entry #204]

06-23-2010 08:20 PM Shifted gears...a little.....
I've been trying to get the welding/grinding finished on the cab.But like a few times in the past I had to do another part of the project to finish the one I'm working on.In this case,the motor/trans had to come out so I can finish the lower firewall/trans tunnel area.


(click photo to enlarge)

(click photo to enlarge)

(click photo to enlarge)
  [Entry #203]

Pages (74): 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [33] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74


All times are GMT -6. The time now is 07:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0 PL2
Copyright Hotrodders.com 1999 - 2012. All Rights Reserved.